Applicable to When processing the mother yarn of our brand “profixM”using a sectional direct warping machine, the following minus-values are obtainable due to reasons for which people make inquiries most frequently as well as their solutions. This will cause you some problems by also not keeping an even tension in the yarn (same for when warping, uneven results). To eliminate the problem, it is critical to control the tension on the mother yarn correctly and continuously as it courses through all of its steps. Yarn breaking is another challenge that can impact production and cause delays. To resolve this problem it is important to look for possible knots or snarls in the yarn and make certain that there isn't too much tension, which may be breaking the yarn.
A frequent problem when mother is fed from a section direct warper machine is yarn “ creeping” or slipping. This occurs if the yarn is not held or tensioned correctly, allowing it to fall off edge of sectional beam. In order to avoid these problems; it is of utmost importance to check if the yarn is firmly joined with the beam and that the tension is well regulated. Not only that but a yarn brake also prevents the yarn from jumping around and tangling as you warp.
One of these problems that you may face is breaking the yarn, which can be caused by a number of issues such as knots or tangles or too-tight tension. The solution to this will depend upon in finding any defect on the Yarn before feeding it into the machine and the tension on which is adjusted depending upon the type of yarn is used. Furthermore, a yarn tension sensor can be used to sense the tension and not permit breakage by providing an indication to the operator if too much tension exists.
This is an excellent yarn to use for direct warping as it's both versatile and user-friendly. Unlike pre-cut warps and other yarn types, mother yarn provides the flexibility to select different yarns for every project without switching between pre-cut warps. Mother yarn is also self-adjustable and can readily be modified to suit specific requirements of the warp formation, being consequently a very competitive natural and economic solution for a direct warping operation.
In addition, mother yarn also provides better control and precision over the warping process, enabling operators to adjust tension and alignment of the yarn for optimal results. Such control could be used to minimize the waste material and enhance efficiency of production. Mother yarn is also generally more durable and less likely to break than pre-wound warps, making it a good option for manufacturers looking to simplify the process of warping while increasing output.
The higher accuracy of free length that is provided by the use of mother yarn on a sectional direct warping machine is one of its major advantages. The mother yarn was used to stabilize the warp ends and keep proper tension and alignment among them, so that a more consistent and stable beam can be achieved. This in turn results in higher quality finished product and lower chance of defect or inconsistency in the final weave.
profixM is the place to buy mother yarn for direct warping in large quantities! Our company provides the best quality Mother Yarn, which is specially developed for sectional direct warping machines. Whether you are a smaller operation who needs small quantities for your adjustable masks, or a larger textile manufacturer, we have the quantities of elastic you need to keep production running easy!
SUZHOU Y.S.D TEXTILE COMPANY IA LOCATED IN SUZHOU PINGWANG TOWN, WITH 30000m2 OF MACHINE PRODUCTION WORKSHPOP, ALSO HAVE 20000m2 OF NYON/ POLYESTER PRODUCTION WORKSHOP.
No.12 Nanyue Road Pingwang Town Wujiang Suzhou City Jiangsu Province China.
Copyright © Y.S.D.TEXTILE All Rights Reserved Privacy Policy
EN
FR
DE
EL
IT
JA
KO
RO
RU
ES
ID
UK
VI
TH
TR
BN
NE
